Product Introduction:
The product is non-toxic, less corrosive, and will not cause secondary pollution after use. Polyferric sulfate(PFS) has good removal effect on suspended matter, organic matter and heavy metal in water, and has the functions of decolorization, deodorization, demulsification and sludge dewatering.
Polyferric sulfate can be used for the treatment of domestic water, but also can be widely used in various industrial water turbidity removal and mining, printing and dyeing, papermaking, food, leather and other industrial wastewater treatment.
Product Features:
1. It has a good removal effect on algae, iron ions, chroma, odor and organic matter in raw water.
2. Relatively less drug consumption, high effluent rate, low treatment cost (per ton of water treatment cost is 30%-60% of traditional aluminum salt), good economic benefits.
3. The COD removal rate of the treated water after the use of the product is 5%-15% higher than that of the traditional product.
4. The product has no adverse harm to human health and will not cause secondary pollution to water body after use.
Product Specification: GB/T 14591--2016
| No. |
Item |
result |
remark |
| 1 |
Fe3+ % w/w |
21.59 |
21.0min |
| 2 |
Reduced matter(as Fe2+) % w/w |
0.01 |
0.1max |
| 3 |
PH(1%Aq. solution) |
2.28 |
2-3 |
| 4 |
Insoluble material % w/w |
0.18 |
0.3max |
| 5 |
appearance |
Yellow powder |
Yellow powder |
Check:Liuyong |
Analyzedby:BoWenhua |
Filled by:Chen Bo |
This product can be added directly, or the dissolved tank is added first, the concentration is 10 to 20%, stirred, and the pump is added to the reaction tank. This product has a wide range of pH, which is more effective under acidic conditions, which is about 100 ~ 1000ppm (ie 0.1 ~ 1 kg / ton wastewater), which is different depending on the amount of phosphate in wastewater. The specific amount is generally determined by experiments.
Hello buyers,
Related products of our water treatment chemicals
Can make relevant customized products according to the water quality indicators;
A certain amount of raw water is taken to add an appropriate amount of this product (such as 500 ppm) to adjust the pH of the wastewater to 7 to 8, and a small amount of polyacrylamide PAM flocculation precipitate is added, and the supernatant is filtered to determine the content of phosphorus. (To handle heavy metals, use the supernatant to carry out the secondary processing.)
PACKING
25KG/50KG/As customers' requirement
Audited Supplier 
){kind=link}
){kind=link}